Skip to content
Richardson Plumbing Solutions (877) 721-3626
04

Garbage Disposal Repair in Richardson, TX

We repair jammed, humming, leaking, and non-running garbage disposals.

A plumber standing with arms folded in a utility room in front of a water heater, copper pipework and an expansion tank running above it, an open tool bag beside him

A disposal that only hums may leave food scraps sitting below the sink for days, while a small leak at the mounting ring can soak the cabinet floor and swell particleboard. After a week, trapped debris can produce a persistent kitchen odor, and water backing up in the sink can make meal cleanup harder. A loose drain connection can also drip onto the dishwasher hose, outlet box, or stored items under the cabinet.

A garbage disposal that stops after a season of rough grinding may have a jammed impeller, worn motor, failed switch, or damaged drain fitting. We check the unit, the sink flange, and the discharge pipe before deciding what repair fits the fault. Disposal repair should not wait when the unit leaks, hums without turning, trips power, or leaves wastewater in the sink, because moisture and food waste can damage the cabinet and create a larger kitchen cleanup problem.

Humming unit and sink water

A humming garbage disposal that will not spin is one of the most common calls we receive. The motor may be receiving power while an impeller is jammed by a utensil, bone fragment, glass, or hard food debris. A disposal that makes no sound at all can point to the reset button, wall switch, wiring connection, outlet, or motor rather than a jam.

Water sitting in one kitchen sink after the disposal runs can come from debris at the grind chamber, a blocked discharge connection, or a drain issue beyond the unit. Customers also call when water drips from the bottom of the disposal, the metal mounting assembly, or the dishwasher inlet. A burning odor, repeated breaker trip, grinding noise, and slow-draining basin each lead us toward different components. Similar symptoms can come from very different faults, so the repair and parts needed can vary substantially once we inspect the disposal.

Under-sink disposal inspection

During a disposal inspection, we first disconnect power at the appropriate source and check the wall switch, plug, reset button, and visible wiring. We inspect the sink flange, mounting ring, drain pipe, dishwasher connection, and cabinet floor for water tracks or loose fittings. When the unit hums, we check the grinding chamber for foreign material and, where the model allows it, use the manual turning point on the underside with the correct wrench.

A basic check of the unit and under-sink connections can take roughly 20 to 40 minutes, while a jam removal or accessible fitting replacement may be completed during the same visit when the needed part is available. We test the sink with running water after work on the discharge pipe or mounting assembly. A failed motor, cracked housing, unavailable mounting hardware, or model-specific electrical component may require a return visit after the correct replacement is obtained.

Motor age and cabinet access

The age and condition of the disposal motor affect the scope of repair. A unit with a reset issue, accessible jam, or loose discharge fitting may need limited work, while a motor with internal damage or a cracked lower housing can call for replacement components or a new unit. The make and model matter because splash guards, mounting assemblies, switches, and electrical connections do not all use the same parts.

Cabinet access also changes the work involved when a disposal sits behind cleaning supplies, water filters, dishwasher hoses, or tight drain piping. A seized under-sink shutoff can add work if water must be isolated for related sink connections, and corroded fasteners can slow removal of an old mounting ring. Parts that must be ordered add another step, and we identify whether any electrical or plumbing change needs local approval before work moves forward.

Model plate and sink cabinet

Before calling, check the disposal’s model number on the label or plate around the unit body or underside, if the label is readable. A photo of that plate, along with the disposal’s approximate age, helps us identify the mounting hardware and likely replacement parts. Let us know which kitchen sink holds the disposal and whether the unit hums, runs, leaks, or trips the breaker now.

Please also mention whether the cabinet has clear access to the disposal, outlet, shutoff valves, and drain pipe. Keep the sink clear of standing dishes if water is backing up, but do not put a hand or tool into the grinding chamber. Call Richardson Plumbing Solutions at (877) 721-3626 before a leaking disposal damages the cabinet floor or a jammed unit leaves food waste trapped under the sink.

When we are open

Mon–Sun Open 24 hours

Next

Next: sewer line repair, or back to the home page.